- Add camera on sricam device viewer how to#
- Add camera on sricam device viewer manual#
- Add camera on sricam device viewer code#
Step1-2: Enable “Motion Detection Alarm” and “Alarm Switch” as FAQ2-3 Step1-1: Tap “Settings” button > “Settings” > “Alarm setting” be the alarm setting window as pictures FAQ2-1, FAQ2-2 and FAQ2-3.
Add camera on sricam device viewer how to#
Tap " Playback" for playback the record on MicroSD card,as pictures below (Note: each record is 30 minutes)įAQ2: How to Setup Motion Detection Alarm Log in “Sricam” App and follow the steps: Settings > Playback
If the SD card recording is full,it will automatically loop coverage, you do not need to manually delete the video file.) (Note: If you use 64G or 128G SD card can`t recording, you need to format the SD card to FAT32 format on your PC. Log in “Sricam” App and follow the steps:Settings -> Record Setting -> SD card Formatting-> Record Switch How to watch live streams with ONVIF clients FAQ1: MicroSD card record and playback settingĢ) MicroSD card format and record setting Camera ID, Camera Password, App Account ID and Passwordĥ. How can I add the camera to my 2nd phoneģ. How to restore the camera to factory settingsĢ. For any other quality and setup issues,it is recommended you insert a pin (until you hear a clash sound) to reset the IP camera.ġ. You can resolve this issue by 1) reconnecting to a non-5G Wi-Fi signal on your smart phone or 2) skip this step and setup the Wi-Fi by going through the steps under “settings”>“Network Setting” on the app. If you fail to setup the Wi-Fi network in step 4-7, please make sure your smart phone is not connecting to a 5G Wi-Fi signal. If you experience inconsistent signal,it could be due to 1)too many devices sharing the same internet network.Or 2)the IP camera is too far from the router if using Wi-Fi connection. If the IP camera can`t be found in step4-4, please make sure you have done step 1-3 to insert a pin to reset the IP camera and wait for 30 seconds. View the Camera on a Smart Phone (Open the “Sricam”App and follow these steps) Method 2: Search“Sricam”on Google Play or iOS App Store
Add camera on sricam device viewer code#
Method 1: Scan the QR code to download the“Sricam” App. The Reset Button of SP020 is next to USB Port) Step1-3: Reset to default setting (After power on the camera, you hear a clash sound from the camera. (Connect the camera to a Router or Switch with a RJ-45 Ethernet cable.) Step1-2: Connect the camera to the network. For Videos of how to setup IP Cameras please visit Website: Start setup After your camera is set up,you can move the camera to your preferred location(the configurations are saved to camera system) You know the WLAN/Wi-Fi password.( No special characters in the password and Wi-Fi SSID such as Your smartphone, camera, and router should be within about 8 feet during setup. Your smartphone is connected to the Internet with a WLAN/Wi-Fi that the camera will connect with. Your router supports the 2.4GHz frequency band (802.11b/g/n). Once the position is set, tighten the screws securely.
Add camera on sricam device viewer manual#
Main Smart Wi-Fi IP cameras Sricam IP Camera - User Manual Sricam IP Camera - User ManualįAQ1: MicroSD card record and playback settingįAQ2: How to Setup Motion Detection Alarm Products Introductionġ: Screw the mount on the wall with the two screws Provided.Ģ: Loosen the thumb screws to adjust the mount to the desired position.